 |
 |
 |
|
11,000lb Two Post Floor Plate Design - Symmetric - Lift
Heavy Duty Series, Universalift, 2 Post Auto & Light Truck Lifts, Utilize Dual, Chain Over Hydraulic, Cylinders for lifting, and usually incorporate cable equalization to ensure balanced lifting.
This UNIVERSALIFT 11KAF Auto Lift is easy to install, notoriously reliable, and easy to work on.
Whether it be a Hydraulic Cylinder replacement, Cable Adjustment, Safety Latch Adjustment or Lowering Valve Replacement, we have not yet seen a design that is more novice friendly.
North American Auto Equipment is proud to offer this light duty commercial lift. We have TESTED these units, and we can now say that this lift is perfect for heavy duty commercial, and priced low enough for farm and residential use.
At only 116 Inches tall, or 9 Ft 8
inches tall, our Universalift 11KAF is our newest two
post car and truck Lift! This lift that can handle vehicles up to 3500
series trucks while maintaining an overall height under 10 Feet! This
low ceiling car and light truck lift can handle the heavier vehicles
that our smaller TP9KF and Universalift 9KAF could not. Perfect for lifting vans, box trucks
and work vehicles with ladder racks, this Low profile floor plate lift allows use
of under hoist equipment like transmission jacks and waste oil drain
tanks when necessary.
** FREE Truck Adapters and Mounting Hardware ** with purchase of lift. 2, 2.75 & 5.5"
Please contact our office for more information. North American Auto Equipment, Sales Office: 866-607-4022.
- Capacity 11,000 lbs.
Height overall - 116"
Width Overall w/Power Unit - 138"
Max Lift Height - 69-1/8 / 71.5"
w/Tallest Adapter - 77"
Width between columns - 112"
Min. Pad Height – 4.5"
Drive through clearance - 102"
Lifting speed - 50 seconds
Asymmetric Lift / Symmetric Lift
Clear Floor Lift
Short Arm Reach min/max -
Long Arm Reach min/max –
Cable Diameter - 3/8"
Column Size – 10x8.5
Column Steel Thickness - 6 mm
Carriage Steel Thickness - 10 mm
Arm Steel Thickness - 9 mm
Ship weight - 2000lbs
Motor rating - 220V - 21 amp - Single Phase
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 11,000 lb lifting capacity Symmetric design
- Dual, Direct Drive cylinders, Low profile automatic arm restraints,
- Stack-able drop-in height adapters
- Free mounting hardware
- Powder-coated paint finish, Padded Electric override & automatic safety shut-off,
- These lifts have steel pulleys, high-strength cable equalization system and everything you’d expect from a quality lift.
Capacity- 11,000 lbs.
Height overall - 116"
Width Overall w/Power Unit - 138"
Max Lift Height - 69-1/8 / 71.5"
w/Tallest Adapter - 77"
Width between columns - 112"
Min. Pad Height – 4.5"
Drive through clearance - 102"
Lifting speed - 50 seconds
Asymmetric Lift / Symmetric Lift
Clear Floor Lift
Short Arm Reach min/max -
Long Arm Reach min/max –
Cable Diameter - 3/8"
Column Size – 9.25 x 9.25
Column Steel Thickness - 6 mm
Carriage Steel Thickness - 10 mm
Arm Steel Thickness - 9 mm
Ship weight - 2000lbs
Motor rating - 220V - 21 amp - Single Phase
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
