You are here: Home > Alignment Lifts

Alignment Lifts

12,000LB CAPACITY SCISSORS ALIGNMENT LIFT 
SL-12A priced at $6995

14,000LB CAPACITY CHAIN DRIVEN 
FP-14KA priced at $3,595.00

"OLD SCHOOL MUSCLE"  ALIGNMENT LIFT 
(Click here to see with optional jacks)

FP-14KO-A


14,000LB CAPACITY FOUR POST 
OPEN FRONT ALIGNMENT LIFT

FP-14KOA priced at $4895


FP14KA-C

 
14,000lb. Capacity Four Post Alignment Lift

NTR-14A

14,000LB CAPACITY HEAVY DUTY ALIGNMENT LIFT

 


Sort By:
Turnplates also known as Turntables for an Alignment Lift (Set of 2) Rolling Air Jack 8000 Rolling Air Jack 8000
Rolling Air Jack 8000
Our Price: $1,195.00
Turnplates also known as Turntables for an Alignment Lift (Set of 2)

*** FREE SHIPPING ***

Increase the versatility of your lift with one of our popular rolling air jacks. Telescoping arms adjust to different tread widths and rollers allow for positioning anywhere under the vehicle. This allows for easy and safe lifting for brake, suspension, and axle work.

*** FREE SHIPPING ***

The Atlas® RJ-8000 is a heavy duty rolling jack designed to lift and support 8,000 LB. The commercial grade RJ-8000 rolling jack can be used to raise the front or rear section of a vehicle; allowing the operator of a four post above ground lift to perform wheel and brake service. Most commercial shops buy two of these hydraulic rolling jacks, so that the entire vehicle can be supported in the air at the same time. The Atlas® RJ-8000 was specifically designed to work with the Atlas PA 16A alignment scissor lift.

The Atlas® RJ-8000 rolling jack has telescoping arms that can be extended over the runways of the four post lift. The lift pads at the end of these arms can be positioned under the LIFTING POINTS that are located over the runways of the four post lift. The Atlas® RJ-8000 rolling bridge is equipped with expandable rail supports which adjust to fit many different brands of four post above ground lifts. These supports have a unique roller system that allows the rolling hydraulic jack to glide easily under the entire length of the vehicle. The large heavy steel wheels allow the rolling jack to be positioned under the correct lifting points in a matter of seconds.

The Atlas® RJ-8000 comes standard with a set of screw up adapters which increases the lifting height of the lift pads. These adapters will allow the Atlas® RJ-8000 rolling hydraulic jack to raise most pick up and larger trucks that sit higher than the average passenger car.

The Atlas® RJ-8000 is equipped with an Atlas® Air/Hydraulic Pump. The air/hydraulic pump requires compressed air (air compressor) to work properly.

Important: The Atlas® RJ-8000 is designed and engineered to operate on "delivered" air pressure of between 70-115 PSI. If you exceed 115 PSI, you may damage your jack.

The Atlas® RJ-8000 rolling hydraulic jack features two solid locking positions that are used when the vehicle is to be suspended above the runways. When the locks of the Atlas® RJ-8000 are engaged, the pressure exerted on the hydraulic system from the weight of the vehicle is eliminated. (These locks act much like a pair of jack stands after you lift a vehicle off the ground with a service jack).


Atlas® 414A 14,000 Lbs. Commercial Grade 4 Post Alignment Lift 12ASL 12,000 Lbs. Capacity Commercial Grade Alignment Scissor Lift Atlas® 12AWFSL 12,000 Lbs. Capacity Alignment Scissor Lift with Wheels-Free System
The Atlas® 414A 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor's lifts. Each Atlas® 414A alignment lift includes a set of front turntables The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. There is also a FREE air line kit ($300 value) included when you purchase the “combo package” (2-rolling jacks). The slip plates are built into the runways and are level with the front turntables. There are included metal cover plates (that cover the cut-outs for the turntables) so that the vehicle is not sitting on the turntable if the lift is not being used for alignment.
Quality workmanship, ease of operation, straight forward installation instructions, a durable powder coat finish and the lowest prices in the Industry makes the Atlas® 12ASL 12,000 alignment scissor lift the perfect choice for the demanding and discriminating shop owner.

Worried about bay space? An Atlas Alignment System allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.

Please call for a freight quote to a Business or Freight Terminal location. $100.00 warehouse & product handling fee applies to all shipments and pick ups. Call today! 866-607-4022.




"WHEELS FREE" IN RAMP JACK SYSTEM

The Atlas® alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability.

All Atlas® alignment scissor lifts can be surface mounted or flush mounted. Each lift comes with approach ramps for the floor mounted application or an optional set of ramps if the customer decides to flush mount the lift. Check the technical specifications to better understand how the extra high lifting height allows the Atlas® 12K alignment scissor to be flush mounted and still offer plenty of room under the runways to properly access the underside of the vehicle.

The extra long 53" long approach ramps make it easy to load low riding vehicles.

Please call for a freight quote to a Business or Freight Terminal location. $100.00 warehouse & product handling fee applies to all shipments and pick ups. Call today! 866-607-4022.