Home > Auto Lifts > 4 Post Lifts >

Atlas 414A 14,000 lb. Capacity 4-Post Alignment Lift
Atlas® 414A 14,000 Lbs. Commercial Grade 4 Post Alignment Lift
Alternative Views:

Please call us @ 1-866-607-4022 For a freight rate. or local availability. Stocking States: TX,CA,ID,ND,MT,MO,MI,MI2,OH,OH2,GA,GA2,IN,FL,MA.

Finance As Low As:

Click to Apply Now!
Our Price: $9,499.00

: Subject to availability
Product Code: ATEATTD414A-ATTD-414A-KIT

Description Technical Specs

The Atlas® 414A 14,000 pound capacity four post ALIGNMENT lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor's lifts. Each Atlas® 414A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. There is also a FREE air line kit ($300 value) included when you purchase the “combo package” (2-rolling jacks - see below). The slip plates are built into the runways and are level with the front turntables. There are included metal cover plates (that cover the cut-outs for the turntables) so that the vehicle is not sitting on the turntable if the lift is not being used for alignment.

Drive- through off-ramps are available as an option.

The Atlas® 414A (14,000 LB. capacity alignment lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 414A is tested to ensure that this alignment lift system will perform flawlessly at its rated capacities. The Atlas® 414A has been manufactured to the same exacting specifications for many years.

The Atlas® 414A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".

** Optional RJ-6 Rolling Air/Hydraulic Center jack 6,000 lbs capacity & Truck adapters ** Sold Separately: $1,270 per jack.

The Atlas® RJ-6 rolling jack is the perfect accessory for either this
alignment rack. The Atlas® RJ-6 (6,000 lbs. capacity) air/hydraulic rolling jack may also be used on competitive scissor lifts and four post lifts that have welded rails on the inside of the runways.

The "wheels free" system that is built into many of the Atlas® scissor lifts is designed to reach and lift most vehicles. Some customers like to use the rolling jacks to lift either the front or the rear of the vehicle at one time.

** Optional Front End Extension Kit ** The 41401 is designed to add a two foot (24”) extension to the runway lengths on our popular Atlas 414/414A four post lifts. The Atlas 414A can accommodate a vehicle with a 175 1/2" (14' 7 1/2") wheelbase, and with the addition of the 41401, the Atlas 414A can accommodate a vehicle with a 199 1/2” (16’ 7 1/2”) wheelbase.

The 41401 is designed and engineered to “bolt on” to the front of the runways of the Atlas 414/414A four post lifts. The 41401 extends PAST (in front of) the cross beam.

Please call us @ 1-866-607-4022 to order today!

Accessories for this product...
8 Gallon Drain Tank 1 1/2 Ton Under Hoist Stand
Our Price: $119.00

Our Price: $189.00

8 Gallon Drain Tank 1 1/2 Ton Under Hoist Stand

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Auto Lifts > 4 Post Lifts
4 Post Auto Lifts
Alignment Lifts
Auto Lifts > Alignment Lifts