Atlas (ATEXHPRO8000EXT) Garage Pro 8000 EXT 8,000 lb Capacity 4-Post Lift

The Atlas® Garage Pro 8000 EXT is a true 8,000 LB. four post lift. The Atlas® Garage Pro 8000 EXT incorporates many of the great features of both the Atlas Garage Pro 8000 and the Atlas Garage Pro 9000.

Many of our customers drive an SUV or pick up truck and wanted a storage lift that would "go higher" to allow them to park their taller vehicles under the elevated ramps.

Many of our competitors sell "taller" lifts. However, their "taller" lifts also have longer runways. Our customers requested that we make a lift which lifts higher, but does not need to have longer ramps. (Longer ramps take up needed garage space). Most customers want to store a car on top and park a SUV or pick up truck below. There is no need for longer ramps. Our Atlas® Garage Pro 8000 EXT ramps will accommodate a vehicle with a 156 inch wheel base. The Atlas® Garage Pro 8000 EXT has been engineered to provide 79" of clearance UNDER the bottom of the raised runway, but keep the runway length to just less than 14 feet long.

If you need the extra lifting height of the Atlas Garage Pro 9000 but do not need the extra width and runway length provided by that lift, then the NEW Atlas® Garage Pro 8000 EXT is the perfect choice.

The Atlas® Garage Pro 8000 EXT is capable of lifting your pick up truck or car 84 1/4 inches. This above ground lift is the perfect choice for storing your vehicle. The extended height feature of the Atlas® Garage Pro 8000 EXT Plus makes this lift the perfect choice for parking taller vehicles under stored vehicles.

The Atlas® Garage Pro 8000 EXT comes standard with a powerful 110 volt power unit. A 30 amp breaker is required.

The portable Atlas® Garage Pro 8000 EXT includes a caster kit with polyurethane wheels. The caster kit can be installed or removed in just a matter of minutes and requires no tools.

All Atlas® portable four post lifts (8,000 lb. capacity) are designed and built for use by Mr. Homeowner or restoration shop. These lifts are not designed to work in commercial repair shops that raise and lower a lift several times per day. If you have questions about which lift will best suit your application, please ask your salesperson.

Specifications

Atlas® Garage Pro 8000 EXT Specifications
Capacity												8,000 LB
Lifting Height												84 1/4" (7' 1/4")
Overall Width (Without Motor)												104 3/8" (8' 8 3/8")
Overall Width (With Motor)												114" (9' 6")
Length Between Columns												157 1/2" (13' 1 1/2 ")
Overall Length with Approach Ramps												207 1/2" (17' 3 ½ ")
Overall Length without Approach Ramps												175 ½" (14' 7 ½")
Approach Ramps												36 3/8" (3' 3/8")
Total Runway Width												21 1/4" (1' 9 1/4 ")
Runway Length												165 1/2" (13' 9 ½ ")
Runway Thickness												4 1/2"
Width Between Runways												37 3/8"
Width Between Runway Rails												31 3/4"
Outside Runway to Outside Runway												74 3/4" (6' 2 ¼")
Clearance Under Runways												79" (6' 7")
Size of Column												6 1/4" x 3 3/8"
Clearance Between Columns												94 3/8" (7' 10 3/8")
Base of Column												9 5/8" x 11 1/2"
Height of Columns												98 1/2" (8' 2 1/2")
Maximum Wheel Base												153 ½" (12' 9 ½")
Drive Thru (Outside of tire to outside of tire)												80 ½ " (6' 8 ½ ")
Cable Diameter												.350"
Gauge Of Steel												6 Gauge (.1875"/ 3/16" / 4.75mm)
Motor												110 Volt. A 30 amp breaker is required.
Oil Requirement												3-5 Gallons AW32/AW46
Shipping Weight												1,739 LB.

	NTO11-QD Seal Kit $99.00
	FP7K & FP8K-4065 Seal Kit $129.00
	Drip Trays - Set of 3 - Measures: 43 1/2" x 24" $129.00