Need more height and length from your Service and Storage Lift?
Then consider the Universalift 8000 FP XLT Four Post, Free Standing, Service and Storage Car Lift, for Home or Light Commercial Use in a Body shop, or Restoration Shop. This product is free standing and will perform on just about any level, hard, surface.
The U8FP-XLT is powered by a self-contained, 110v Electro-Hydraulic Power Unit. The power unit pressurizes a single 3" Diameter hydraulic cylinder that extends outward in the low position, and draws inward as the hydraulic cylinder is pressurized with fluid, creating tension on the cables that are laced around steel pulleys, and bolted to the top cap at the top of each post.
This original lift design utilizes the traditional welded block, captured, safety system. The locking positions are welded into a channel on the outside edge of the column, facing inward.
The Universalift 8000 FP XLT is classified as a Free Standing, Portable, 4 Post Auto Lift, for Light Commercial and home use.
If you are considering an Auto Lift for Home Use, the Universalift 8000 FP is the ideal choice, given the fact that is free standing, and comes standard with all of the accessories needed for home use. The Universalift 8000 FP parking lift, for home use, comes standard with a wheel kit to make it easy for a homeowner to move it. The Universalift 8000 FP was designed with the residential user in mind, and its evident when you see how thoughtfully the product is packaged along with three drip trays that protect the vehicle that is being parked underneath the lift. A home owner, or light commercial user, will be impressed with all of the thoughtful preparations found inside our pre-assembled Universalift 8000 FP car lift. Our safety linkage is pre-assembled making it easier for the residential auto lift user to assemble our product. This car lift comes standard with the main hydraulic cylinder installed, along with all four cables, under the power side runway. When considering a residential car lift for service and storage, consider the Universalift 8000 FP, for its ease of assembly, thoughtful packaging, thoughtful pre-assembly of all major systems, Free drip trays, Jack Tray, High quality Caster kit, Factory installed safety Linkage, Factory installed Hydraulic Cylinder, Factory installed cables, and of course, North American Auto Equipment hands on experience.
Comes complete with ALUMINUM Approach Ramps (that can be used on either side), 3 Drip Trays, 1 Jack Tray, 2 sets of Wheel Stops & Caster Kit for easy portability!
Capacity - 8,000 lbs
Overall Height of column - 94"
Overall Length - 190" (does not include removable drive on ramps)
Length of Ramps - 36"
Overall Width (outside baseplates) - 112"
Lifting Height - 82"
Height Under Runway - 79"
Length of Runways - 180"
Drive thru - 99"
Width of Runways - 18"
Lowered Height - 5"
Lock Position - 10
Base Plate Size - 10 x 12
Lock Release - Single Point
Lifting Speed - 40 Seconds
Power - 110V
Ship Weight - 1,695 lbs