The MX-300 Waste Oil Heater is our largest unit pushing out up to 300,000 BTU's an hour. It features a fine grained galvanized (rust-resistant) cabinet to protect it in most shop environments, a high performance MX series burner that burns more efficient than any other burners to date, an internal fan to reduce excess noise in your shop, and adjustable locking louvers to direct air flow. All our units are UL listed so you can be assured that safety is a high priority with all Lanair products.
Waste Oil (used crankcase oil up to 50 wt), #1 & #2 Fuel Oil, hydraulic fluid, automatic Transmission Fluid.
Synthetic oil, up to 25% blend with above waste oil list.
*BTUH value varies with fuel type**The suggested heating area is based on building with minimal heat loss due to open door, construction, materials, windows, insulation, etc...*** Chimney package is optional****Customer supplied. Source must be capable of producing 2.0 CFM @ 60 PSI.
† Stay away from gear lubes, they do not burn and will cause additional maintenance for your waste oil heater.Hazardous waste is illegal to burn in a waste oil heater.The EPA of the USA does not allow the burning of Brake fluid, and it is illegal to burn in a waste oil heater.There is no UL safety standard for the burning of Used Cooking Oil (vegetable oil) at this time. It should not be burned.
Note: International customers should check their local regulations, as ‘what you can legally burn’ may change.