THE NORTH AMERICAN AUTO EQUIPMENT - ACTION 18' FRAME MACHINE PACKAGE
Faster Set Up Time, Time tested and Battle proven design.
4 rows of quick set tie down positions side to side on each work
table tread way, 14 front to back, 1 and 2 point tower anchoring
through each 90 degree turn. Quicker set up is a no-brainer.
18' Stock Model is equipped with 190 tie down points and configurations. To our
knowledge this is one of the highest in the industry. Most Auto Body
technicians that have been trained on an EZ Liner will recognize and
appreciate the convenience and speed of the setup we offer.
Smoother and More Powerful are the only 4 words that will
describe this machine. A 7,700lb Vehicle can easily be hoisted into a
comfortable working position. Hardened steel rollers with zerk fittings
for periodic lubrication allows each tower to roll smoothly and roll 360
degrees around the platform with minimal effort, giving you the ability
to make a pull at virtually any angle without complications.
Raising the work platform is as simple as the touch of a button
located on the control pump that comes with a handle for easy maneuvering.
Blueprinted Milled Deck with tubular steel running
lengthwise and side to side for the strength grid effect. 12mm Plate steel
deck components, hydraulic tilt makes loading and unloading easy. The
diamond plate steel approach ramps are extended for low riders. These
sturdy ramps make loading and unloading easier. 13mm and 14mm are available but not necessary on this model.
Hydraulic tilt incorporates one 10 ton
hydraulic cylinder with high pressure quick disconnect fittings. Smooth
and powerful are the only two words that will describe this machine. A 7,000lb vehicle can easily be hoisted into a comfortable working
position. Hardened steel rollers with zerk fittings for periodic
lubrication allows each tower to roll smoothly and roll 360 degrees
around the platform with minimal effort, giving you the ability to make a
pull at virtually any angle without complications.
The structure is true and precision flat for highly accurate world class collision correction facilities.
Quality adjustable height chassis clamp extension tubes
adjust up and down with a spanner wrench with minimal effort. The
extension tubes are heat treated and guaranteed to impress.
Precise tolerances are achieved through quality control and supervision.
All Tower anchoring positions are exactly symmetrical.
Telescoping tower heads with chain anchors, what could be easier.
Acme Thread head treated tower anchors for 2 or 3 point solid anchoring, strength will be your friend in the long run.
Anchoring clamps are completely and freely adjustable; no pins and tubes.
They actually dial in! Photos in photo gallery that show a Universal 20' lift system are for bed display purposes only. The Universal and Action Frame Machine Lines share the same bed. The white scheme with blue and white, gives a hospital type appearance for high end look.