Omni Waste Oil Heaters | Furnaces

OMNI waste oil heaters do not requiring constant cleaning and adjustments.
Operations others would have you believe are standard procedures. With an OMNI you can eliminate your normal costs of heating, avoid the liabilities of handling, storage, and eliminate hauling costs.

On top of all of these benefits, you can realize a full return on your investment quickly;
usually within the first 18 months.

OMNI burns fuels from kerosene to 90W gear oil (including synthetics). OMNI's hands-off system combines our patented oil preheat and oil flow control to burn a wider range of fuel than other waste oil burners, with no adjustments.

Highest quality heaters/boilers/air conditioners on the market. OMNI's advanced design, high level of quality and craftsmanship combine to make OMNI the premier unit in the industry today.

State of the art, solid state Oil Preheat System. OMNI's patented system provides consistent oil temperature and viscosity to the burner. Solid state controls allow only a 3° variance in oil temperature. This maintains oil viscosity and results in the most thorough, clean and consistent burn available. Other manufacturers' mechanical preheat systems allow large temperature variances which cause varied fuel viscosity and inconsistent flame in combustion chamber, resulting in uneven heat and quicker failure of chamber.

Preheater heats both oil and air at the same time for optimum atomization (spray) and completeness of burn.

Electronic oil shut off valve eliminates nozzle drip - won't allow stalagmite of sludge at the bottom of the chamber.

Patented Oil Preheat System ELIMINATES the need for routine disassembly of your burner to scrape out carbon build up in the oil heat block. OMNI's patented oil preheater uses advanced technology to eliminate the need for cleaning. Our superior design will not carbon. OMNI is the only manufacturer that can say this!

Built-in air compressor. OMNI includes a built-in vane oil-less compressor as standard equipment. Our compressor requires no maintenance and allows the unit to be operated 24 hours/day without an external air supply. You eliminate the risk of destroying a shop air compressor if an air line were to rupture.

Long burn path provides high efficiency and eliminates the need for a target wall. OMNI waste oil burners are up to 85% efficient. Our long combustion chamber burn path and oil flow control capabilities eliminate the need for a target wall. With others, target walls are subject to direct exposure to flame and extreme temperature changes which destroy the target and require them to be replaced frequently.

Stainless steel heat exchanger is standard. OMNI waste oil furnaces feature high grade stainless steel heat exchangers. Stainless steel is the longest lasting, most durable material available for high temperature applications. Other manufacturers use lower cost materials and try to compensate with thicker walls of inferior steel.

Patented Oil Flow System controls fuel by volume. OMNI's patented flow control system regulates fuel by volume. Conventional waste oil burners use a preset pump and control fuel delivery with a fuel pressure regulator. This conventional system creates variable to fuel flow and cause over and under firing.

12 Year Warranty. OMNI waste oil furnaces are so reliable that they are backed by a 12 year non-prorated warranty.

Swing out burner. Allows easy access for cleaning of burner nozzle and end cone if needed. Combustion chamber annual clean out is easy. OMNI provides complete access to inside of combustion chamber and heat exchangers with the largest openings in the industry.

Full access clean out panel. OMNI provides complete access to the inside of heat exchanger and combustion chamber through our full length clean out panel. Other manufacturers provide only limited access or require clean out of exchangers that are too small to thoroughly reach.

Flame Control System

The OMNI Flame Control System is a patented system that consists of an Oil Flow Supply Pump and a Non-Carboning Oil Preheater that controls the fuel by volume.
No Adjustments needed for various viscosities.

The Flame Control System can be purchased separately with a universal burner mounting flange allows easy retrofit of our burner system to various configuration and sizes of combustion chambers. Initial flame adjustment is all that is needed with complete control thereafter.

Flame Control System Benefits:

• Non-carboning oil heater block – cleaning not required
• A thorough burn – greatly reducing ash deposit accumulation
• Only system that can burn 90 weight oils
• Less stress on metals – cannot over fire (after initial proper flame adjustment).
  No target burn-out
• Clean heater once a season under normal conditions
• The most reliable and consistent operation
• Greater efficiency

Single Burner Does it All!
This model Omni burner is uniquely able to be adapted to any existing oil burning appliance without additional remote equipment needed. We accomplish this by incorporating every component required to make a waste oil burner function by integrating them into one neat package. No other manufacturer can accomplish this! Additionally this burner has a universal mounting flange for readily adaptable installation.

Omni includes a built-in vane oil-less compressor as standard equipment.
Our compressor requires no maintenance and allows the unit to be operated 24 hours/day without an external air supply.

Swing out burner door, no fuel or air lines to disconnect. Removal of one nut and electrical safety plug allows easy access to flame end cone and nozzle for quick service.

Easy Access to Burner Components. Hinged Cover opening provides quick access to heater block and circuit board if needed.

The Industry's ONLY Non-Carboning Oil Preheater Block with a
Solid State Circuit Board Controller

These items precisely control the oil and air temperatures to insure stable viscosity for optimum control of the flame resulting in a thorough burn. Heater block never carbons or needs to be removed for cleaning. Industry normal annual parts kit not needed with OMNI's system! Readjustment of electrodes and nozzle replacement every 5 years is all that is needed due to erosion only.

Stainless Steel Heat Exchangers. Omni waste oil furnaces feature high grade stainless steel heat exchangers. Stainless steel is the longest lasting, most durable material available for higher temperature applications. Other manufacturers use lower cost materials and try to compensate with thicker walls of inferior steel.

Our Heat Exchangers consist of formed 304L 16 Ga. Stainless steel plates with have a double rolled pressed seam. This pressed seam construction eliminates the possibility of stress cracks that can occur from welding.

Longest Burn Path. Omni waste oil burners are up to 90% efficient, producing more heat for every gallon of waste oil burned.

High Volume Fans
Omni heaters have incorporated a unique method of throwing air across their combustion chamber with high volume pressure style fans. This type fan is used in lieu of typical free air fans for area heating or squirrel cage blowers for ducting heat to various rooms. Keeping overall weight and shipping costs down, and easing installation. Additionally reducing the electrical costs associated with using squirrel cage blowers.

Large lift out cabinet door (150/250/350/500 Models) and a hinged end plate cover opening (250/350/500 models) makes for easy access to combustion chamber & heater exchangers for occasional vacuuming of ash deposit accumulation. Under normal operating conditions, seasonal cleaning is required. Some oils require only once a year cleaning.

Our long combustion chamber burn path and oil flow control capabilities eliminate the need for a target wall. With others, target walls are subject to direct exposure to flame and extreme temperature changes with destroy the target and require them to be replaced frequently.

Burns Clean – Zero Smoke.
Burns clean with zero smoke, when U.L. tested we saw between 0-1 on a Bacharach scale of 0-10, cleaner burning than some standard oil burners.

• Annual Burner Repair Kit: $200+
• Optional On-Board Air Compressor: $300-$600+ Additional Compressor Increases Electrical Demand - Costs: $??
• Optional Oil Flow Control Supply Pump: $400+
• Additional Costs for Ductible Units: $300 - $800+
• Maximum Burn 50 Weight
• Optional Longer Life Stainless Steel Construction: $300+
• Annual or MORE Preheater Carbon Flush Service Costs: $??
• More Service Technician Costs such as Travel and Time: $??

When comparing an OMNI with more features and less maintenance to the Competition...
The best bargain at a competitive price is the easy choice!

• Non-carboning oil heater block - cleaning not required
• A thorough burn - greatly reducing ash deposit accumulation
• Only system that can burn 90 weight oils
• Less stress on metals - can't overfire. No target burn-out
• Clean heater once a season under normal conditions
• The most reliable and consistent operation
• Greater efficiency