Heavy Duty 2 Post Lifts | North American Auto Equipment

TP15KAC-K 2 Post Car Lift $3995.00	MADE IN USA Bison® Series \| 15K Capacity Lift

MADE IN USA Bison® Series \| 18K Capacity Lift	MADE IN USA Bison® Series \| 20K Capacity Lift

The Following light duty 2 post lifts use hydraulic equalization to their two cylinders for synchronized lifting eliminating the need for chains screws cables or pulleys, the carriages slide thru the columns on either 4" roller bearings in 7/8" fork lift mast channels.

The heavier duty 2 post lifts use electro-hydraulically equalized PLC controls that synchronize the two columns during the lift's full travel. Most of our sets of 2 post lifts are constructed with heavy duty 7/8" fork lift mast channels and utilize three stage swing arms with stackable height adapters. Lifting height for our lighter duty lifts are 72" regular lifting height or 81" by using the height adapters, and for the heavy duty lifts 73" regular height with a possible 85" using the height adapters. Height Adapters, 7/8" Fork Lift Mast Channels, Hydraulic Column Synchronization PLC Controls.

PK10B (10,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports Overhead sensor to protect vehicle from topping out Available with fork lift mast channels and roller bearings or ultra-high molecular plastic sliding blocks.

PK12B (12,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports Overhead sensor to protect vehicle from topping out 7/8" Fork lift mast channel with 4" roller bearings

PK16 (16,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports Overhead sensor to protect vehicle from topping out (PLC Controled column synchronizing is optional)

PK18 (18,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports 7/8" Fork lift mast channel with 4" roller bearings Overhead sensor to protect vehicle from topping out (PLC Controled column synchronizing is optional)

PK20 (20,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports 7/8" Fork lift mast channel with 4" roller bearings (PLC Controled column synchronizing is optional)

PK22 (22,000 lb Capacity) PLC controlled electro-hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports 7/8" Fork lift mast channel with 4" roller bearings

PK26 (26,000 lb Capacity) PLC controlled electro-hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports 7/8" Fork lift mast channel with 4" roller bearings

PK30 (30,000 lb Capacity) Hydraulically equalized lifting 3 Piece telescopic extendable arms Available in symmetric and asymmetric design Velocity fuse safety valve in both cylinder ports 7/8" Fork lift mast channel with 4" roller bearings

Return to Top of Page

TP15KAC-K 2 Post Car Lift $3995.00	MADE IN USA Bison® Series \| 15K Capacity Lift

MADE IN USA Bison® Series \| 18K Capacity Lift	MADE IN USA Bison® Series \| 20K Capacity Lift

Vehicle Lifts

Wheel Service

Autobody

HVAC

Exhaust Benders

Pipe Benders

Vehicle Systems

Small Shop Equipment

Air Compressors

Zinko Jacks

THE LONGHORN PORTABLE TWO POST LIFT